DETAIL IKLAN
5201

JoinWit JW4106S Optical Fiber Fusion Splicer

Pondok Aren, Tangerang Selatan
  • Rp 16.500.000
JoinWit JW4106S Optical Fiber Fusion Splicer
============================================================
Features
  • Touch Screen with 4.3-inch LCD display
  • Small and light, easy to carry
  • USB and SD card interfaces, U-disk automatic software upgrade
  • Built-in modular lithium battery, supports 280 times of splicing and heating cycles.
  • Precise fiber core alignment, ultra-low fiber fusion splicing consumption
  • 7s fast fusion splicing, 18s highly efficient heating.
  • 320 times image magnification, 5mm fusion splicing for fibers of ultra-short cutting length
  • 300 groups of fusion splicing modes, 100 groups of heating modes
  • 10000 groups of fusion records, 64 images storage
  • Ceramic presser foot, precise V-block, 3 in 1 fixture for bare optical fiber, tail optical fiber, jumper wire, covered wire
  • Automatic splicing, intelligent pyrocondensation
  • Water-resistant, dust-resistant and shock-resistant in design
============================================================
Specifications
Model : JW4106S
Alignment method : Precise core alignment and cladding alignment
Applicable fibers : Any common optical fibers, rubber-insulated fibers and jumpers that meet requirements of ITU-TG.651-653, ITU-TG.655 and ITU-TG.657.
Optical fiber diameter : Cladding : 80 150p m, coating layer : 0.1 3mm
Cutting length : 5 16mm (coated optical fiber diameter 250p m) 10mm (coated optical fiber diameter: 0.25 3mm)
Fusion splicing consumption (typical value) : 0.02dB (SMF); 0.01dB (MMF); 0.04dB (DSF)
Return loss : (NZDSF) Better than 60dB
Fusion splicing time (typical value) : 7s
Heating time (typical value) : 18s
Pulling force test : 1.96 2.25N
Thermal shrinkage tube : 60mm, 40mm and a series of thermal shrinkage tubes
Graphical display : High-performance 4.3 inch LCD
Magnification time : 320 times/88 times
Fusion splicing record : 10000 groups
Battery capacity : IV, 6400mAh, typical value of fusion splicing and thermal cycle is 220 times
Battery service life : Cycle charging times reach 300 500, can be replaced by customers
Electrode service life : Typical value is 4000 times, can be replaced by customers
Construction lighting : Built-in lights with high-brightness and wide lighting area
Working environment : Temp : -10-50 C; hum : 0-95%RH, height above sea level : 0 6000m
Operation interfaces : GUI graphical operation interfaces
External power : ACIOO 240V, 60Hz, O ISA; DC: DCIO
External port : USB SD
Dimensions : 120mm (W) x 130mm (H) x 154mm (D) (without rubber anti-vibration pad)
Weight : 1.59kg (host engine), 0.37kg (battery)
Standard Packages : Main engine, Optical fiber cutter, Miller clamp, AC power cord, AC power adapter, Spare electrode, Cooling pallet, Cleanup set, User Manual, Multi-functional carrying case
===========================================================
UNTUK MENGHINDARI PESANAN BARANG ANDA DITOLAK OLEH KAMI, SILAHKAN BERTANYA STOCK BARANG TERLEBIH DAHULU. TERIMA KASIH
Untuk informasi dan pemesanan, silahkan menghubungi :
Telp. WA :
Mail : asiaindustri@gmail.com
============================================================
Dilihat 61 kali
×
photo profil
Asia Industri
Hati-hati dengan penipuan. Harus bertemu secara langsung di tempat yang aman untuk melihat barang atau jasa. Meminta transfer uang adalah untuk menipu.